Documents

Quanta Technology, Oak Ridge National Laboratory and San Diego Gas & Electric. 2021. "Distribution Synchronized Measurements Road Map Final Report" prepared for U.S. Department of Energy and Oak Ridge National Laboratory. September. Available online: https://www.naspi.org/sites/default/files/tmp...

Introduction The mission of the NASPI Distribution Task Team is to foster the use and capabilities of networked PMUs at the medium-voltage distribution level, beyond the substation. This group will share information in support of effective research, development and deployment of distribution PMUs...

The repository contains point-on-wave data collected on the 20 kV network of EPFL-campus, in a MV/LV substation supplying 2 office buildings and a 560 kWh/720 kVA battery energy storage system (BESS). The waveform recorder functionality has been integrated in the PMU developed in EPFL-DESL. The data...

ARPA-E Plus-Up Project Award # DE-AR0000340, Milestone 1.3.2, Subtask 1.33 Draft March 23, 2018. Aminy Ostfeld, Kyle Brady, Laura Mehrmanesh and Alexandra von Meier, UC Berkeley. This manual is a living document, intended to help utilities and researchers in the planning and installation of networks...

A white paper by the NASPI Distribution Task Team (January 2018). The purpose of this white paper is to provide an introductory reference for industry and academic practitioners interested in exploring the use of synchrophasors and other time-synchronized measurements for supporting power...

Use Case The objective of Phase Identification is to recognize, track and report the connectivity and loading of Phases A,B,C through the distribution system so as to prevent excessive phase imbalance. Background Distribution system maps and models tend to lack reliable information about which...

Use Case Disaggregation of net metered distributed generation (DG) from customer load uses high-precision measurements on the utility side of the meter to estimate the actual generation and amount of load offset behind the meter. Background When the distribution utility lacks access to separate load...

Use Case Synchronized measurements at multiple locations throughout a distribution system during a fault can aid in the location of the fault and expedite service restoration. Background The vast majority of faults originate in distribution systems. The traditional means of locating a fault on a...

Use Case Conventional remote terminal unit (RTU) based automation approaches suffer from slow measurement update and lack of time-stamp values for precise comparison of state parameters at different locations . A time-synchronized control approach is more favorable for protection event analysis...